Dell E30S002 Manual

Steps1 Locate the IDSDM/vFlash connector on the system board.To locate IDSDM/vFlash, see the System board jumpers and connectors section.2 Align IDSDM/vFlash card with the connector on the system board.3 Push IDSDM/vFlash card until it is firmly seated on the system board.Figure 63. Installing optional IDSDM/vFlash cardNext steps1 Install the MicroSD cards.NOTE: Reinstall the MicroSD cards into the same slots based on the labels you had marked on the cards duringremoval.2 Follow the procedure listed in After working inside your system.Related linkSystem board jumpers and connectorsInstalling the MicroSD cardProcessors and heat sinksThe processor controls memory, peripheral interfaces, and other components of the system. The system can have more than oneprocessor configurations.The heat sink absorbs the heat generated by the processor, and helps the processor to maintain its optimal temperature level.Installation and Service ManualInstalling and removing system components115