Dell E30S002 Manual
                                                                                                                                                      |
Figure 28. Installing a drive into the drive carrierRelated linkRemoving a drive blankInstalling the front bezelRemoving a 2.5 inch drive from a 3.5 inch drive adapterPrerequisites1 Follow the safety guidelines listed in Safety instructions.2 Remove the 3.5 inch drive adapter from the 3.5 inch drive carrier.NOTE: A 2.5 inch drive is installed in a 3.5 inch drive adapter, which is then installed in the 3.5 inch drive carrier.Steps1 Using the Phillips #2 screwdriver, remove the screws from the side of the 3.5 inch drive adapter.2 Remove the 2.5 inch drive from the 3.5 inch drive adapter.76 Installation and Service ManualInstalling and removing system components |
Related manuals for Dell 4PM34
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine