Dell E30S002 Manual

Figure 17. Removing caster wheelsNext stepInstall the caster wheels or the system feet, as applicable.Related linkInstalling the system feetInstalling caster wheelsInstalling caster wheelsPrerequisites1 Follow the safety guidelines listed in Safety instructions.2 Place the system on its side on a flat, stable surface.3 If installed, remove the system feet.Steps1 Align the two retention hooks on the rear wheel unit with the two slots on the base of the system, and insert the hooks into the slots.2 Push the rear wheel unit toward the back of the system and using a Phillips #2 screwdriver secure the unit in place using a singlescrew.3 Align the two retention hooks on the front wheel unit with the two slots on the base of the system, and insert the hooks into the slots.4 Push the front wheel unit toward the front of the system and using a Phillips #2 screwdriver secure the unit in place using a singlescrew.Installation and Service ManualInstalling and removing system components65