Controller ManagementEnabling Boot SupportNOTE: See your system documentation to ensure the proper boot order is selected in the system BIOS.In a multiple controller environment, you can enable BIOS on multiple controllers. However, if you want to boot from aspecific controller, enable the BIOS on that controller and disable it on the other controllers. The system can then bootfrom the BIOS-enabled controller. Perform the following steps to enable the controller BIOS:1. Press to access Ctrl Mgmt menu screen.2. Press to move the cursor to Enable Controller BIOS in the Settings box.3. Press the spacebar to select Enable Controller BIOS.An X is displayed beside Enable Controller BIOS.4. Press to move the cursor to the Apply button, and then press to apply the selection.The controller BIOS is enabled.To disable the controller BIOS, use the spacebar to de-select the Enable Controller BIOS control, and then selectApply and press .Enabling Boot Support For A BIOS-Enabled Controller1. Press to access the Ctrl Mgmt menu screen.2. Press to move the cursor to the Select Boot Device in the Settings box.3. Press the down-arrow key to display a list of virtual disks and Non-RAID physical disks (PERC H310 only).4. Use the down-arrow key to highlight a virtual disk or Non-RAID physical disk (PERC H310 only).5. Press to select the disk.6. Press to move the cursor to the Apply button, and then press to apply the selection.Boot support is enabled for the selected controller.Enabling BIOS Stop On ErrorThe option BIOS Stop on Error is used to stop the system from booting if there are BIOS errors. Perform the followingsteps to enable BIOS Stop on Error.1. Press to access the Ctrl Mgmt menu screen.2. Press to move the cursor to Enable BIOS Stop on Error in the Settings box.3. Press the spacebar to select Enable BIOS Stop on Error.An X is displayed beside Enable BIOS Stop on Error.4. Press to move the cursor to the Apply button, and then press to apply the selection.The controller BIOS is enabled. To disable Enable BIOS Stop on Error, use the spacebar to de-select Enable BIOSStop on Error, then select Apply and press .Enabling Auto ImportIf there is a native configuration present on the controller, the option Enable Auto Import automatically imports everyonline foreign configuration during boot without having the need to access the BIOS Configuration Utility ( ).57
