CorrectiveAction:Check the cable connections and fix any issues. Restart the system. If there are no cableproblems, press any key or to continue.Dirty Cache Data Error MessageError Message: The following virtual disks are missing: (x). If you proceed(or load the configuration utility), these virtual disks willbe removed from your configuration. If you wish to use them ata later time, they will have to be imported. If you believethese virtual disks should be present, please power off yoursystem and check your cables to ensure all disks are present.Press any key to continue, or 'C' to load the configurationutility. The cache contains dirty data, but some virtual disksare missing or will go offline, so the cached data cannot bewritten to disk. If this is an unexpected error, then pleasepower off your system and check your cables to ensure all disksare present. If you continue, the data in cache will bepermanently discarded. Press 'X' to acknowledge and permanentlydestroy the cached data.Probable Cause: The controller preserves the dirty cache from a virtual disk if the disk becomes offline or isdeleted because of missing physical disks. This message indicates that some configured diskswere removed. If the disks were not removed, they are no longer accessible. The SAS cablesfor your system might be improperly connected.CorrectiveAction:Check the cable connections and fix any problems. Restart the system. Use the utility to import the virtual disk or discard the preserved cache. For the steps to managepreserved cache, see the topic Managing Preserved Cache.BIOS Disabled Error MessageError Message: BIOS Disabled. No Logical Drives Handled by BIOS.Probable Cause: This warning message is displayed after you disable the ROM option in the configuration utility.When the ROM option is disabled, the BIOS cannot boot to Int 13h and cannot provide theability to boot from the virtual disk. Int 13h is an interrupt signal that supports numerouscommands that are sent to the BIOS and then passed to the physical disk. The commandsinclude actions you can perform with a physical disk, such as reading, writing, and formatting.CorrectiveAction:Enable the ROM option.Drive Configuration Changes Error MessageError Message: Entering the configuration utility in this state will result indrive configuration changes. Press 'Y' to continue loading theconfiguration utility or please power off your system and checkyour cables to ensure all disks are present and reboot.Probable Cause: The message is displayed after another BIOS warning indicating there are problems withpreviously configured disks and you have chosen to accept any changes and continue. TheSAS cables for your system might be improperly connected.73
