Deleting an Asset Tag NumberTo delete the asset tag number without assigning a new one, perform the following steps:1. Boot the computer from a bootable diskette or CD-ROM.2. Type cd c:\Dell\Util and press .3. Type asset /d and press .Assigning an Owner TagAn owner tag can have up to 48 characters; any combination of letters, numbers, and spaces is valid. Toassign an owner tag, perform the following steps:1. Boot the computer from a bootable diskette or CD-ROM.2. Type cd c:\Dell\Util and press .3. Type asset /o and a space followed by the new owner tag, and press .For example, type the following command line and press :asset /o ABC Company4. When the system prompts you to verify the owner tag, type y and press .The system displays the new owner tag.Deleting an Owner TagTo delete the owner tag without assigning a new one, perform the following steps:1. Boot the computer from a bootable diskette or CD-ROM.2. Type cd c:\Dell\Util and press .3. Type asset /o /d and press .NOTE: For security, you cannot set, change, or delete the owner tag if the primary or administratorpasswords are set.Table 1 lists the command-line options you can use with the Asset Tag utility. To use one of these options,open an MS-DOS® prompt, type asset and a space followed by the option, and then press .Table 1. Asset Tag Utility Command-Line OptionsAsset TagOption Description/d Deletes the asset tag number
