System, Device Type, and Topic pull-down menus.A link or links appear(s) for the specific drivers or utilities used by your computer.6. Click the link of a specific driver or utility to display information about the driver or utility you want toinstall.7. At the driver information screen, do one of the following:Click the Install button (if present) to start the automatic installation. At the welcomescreen, follow the screen prompts to complete the installation.If no Install button is present, automatic installation is not an option. For installationinstructions, either go to the appropriate procedure below or click Extract, follow theextracting instructions, and read the readme file.NOTE: If instructed to navigate to the driver files, click the CD directory on the driver informationscreen to display the files associated with that driver.Reinstalling the Asset Tag Utility1. Insert the ResourceCD.In most cases, the CD should start running automatically. If it does not, start Windows Explorer, clickyour CD drive directory to display the CD contents, and then double-click the autorcd application file.If a welcome screen appears, click Next. The first time that you run the CD, it might prompt you toinstall some setup files. Click OK and follow the instructions on the screen to continue.2. Under Search Criteria, select the appropriate categories from the System Model, OperatingSystem, and Device Type pull-down menus, and select Utilities from the Topic pull-downmenu.A link or links appear(s) for the specific utilities used by your computer.3. Click Asset Tag.4. Click Extract.5. Unzip the Asset Tag utility on the ResourceCD to the c:\dell\util directory on your hard-disk drive.To use the utility, see "Assigning an Asset Tag."Manually Reinstalling the Internal Modem and Network Adapter Drivers(Optional)If you ordered the internal modem, you need to reinstall the modem driver.If you ordered the combination modem/network adapter, you need to reinstall both the modem and networkadapter drivers.