Troubleshooting 123Starting the Dell Diagnostics From the Drivers and Utilities Media1 Insert the Drivers and Utilities media .2 Shut down and restart the Tablet-PC.When the DELL logo appears, press immediately.NOTE: If you wait too long and the operating system logo appears, continueto wait until you see the Microsoft® Windows ® desktop; then, shut down yourTablet-PC and try again.NOTE: The next steps change the boot sequence for one time only. On thenext start-up, the Tablet-PC boots according to the devices specified in thesystem setup program.3 When the boot device list appears, highlight CD/DVD/CD-RW and press.4 Select the Boot from CD-ROM option from the menu that appears andpress .5 Type 1 to start the CD menu and press to proceed.6 Select Run the 32 Bit Dell Diagnostics from the numbered list. Ifmultiple versions are listed, select the version appropriate for yourTablet-PC.7 When the Dell Diagnostics Main Menu appears, select the test you wantto run.Dell Diagnostics Main Menu1 After the Dell Diagnostics loads and the Main Menu appears, click thebutton for the option you want.NOTE: It is recommended that you select Test System to run a complete test onyour Tablet-PC.Option FunctionTest Memory Run the stand-alone memory testTest System Run System DiagnosticsExit Exit the Diagnostics
