Dell OptiPlex GX260 Series User Manual

Also see for GX260 - Optiplex Pentium 4 2.0GHz 512MB 40GB CD: Setup and quick reference guide Features list System user's guide Service manual Disassembly

Solving Problems: Dell OptiPlex GX260 Systems User's GuideWARNING: Dell's Disk Monitoring System has detected that drive [0/1] on the[primary/secondary] EIDE controller is operating outside of normalspecifications. It is advisable to immediately back up your data and replace yourhard drive by calling your support desk or Dell— During initial start-up, the drivedetected possible error conditions.● When your computer finishes booting, immediately back up your data and replaceyour hard drive (for installation procedures, see "Adding and Removing Parts" foryour computer type).● If no replacement drive is immediately available and the drive is not the onlybootable drive, enter system setup and change the appropriate drive setting toNone. Then remove the drive from the computer.Write fault— The operating system cannot write to the floppy or hard drive. See "DriveProblems" for troubleshooting suggestions.Write fault on selected drive— The operating system cannot write to the floppy or harddrive. See "Drive Problems" for troubleshooting suggestions.x:\ is not accessible. The device is not ready— The floppy drive cannot read the disk.Insert a floppy disk into the drive and try again.General ProblemsA program stops respondingEnd the programWindows XP, Windows 20001. Press simultaneously.2. Click Applications.3. Click the program that is no longer responding.4. Click End Task.Windows NT®1. Press simultaneously.2. Click Task Manager, and click Applications.3. Click the program that is no longer responding.4. Click End Task.Windows 98http://support.dell.com/support/edocs/systems/opgx260/en/ug/solvprob.htm (16 of 30) [10/25/2007 1:44:24 PM]