272 Configuring Switch Infor mationw w w . d e l l . c o m | s u p p o r t . d e l l . c o mThe following is an example of the CLI commands:Console (config)# gvrp enableConsole (config)# interface ethernet 1/e8Console (config-if)# gvrp enableConsole (config-if)# gvrp-vlan-creation-forbidConsole (config-if)# gvrp registration-forbidConsole# show gvrp configurationGVRP Feature is currently enabled on the switch.Maximum VLANs: 256, Maximum VLANs after reset: 256.Port(s)StatusRegistrationDynamic VLANTimers (milliseconds)CreationJoinLeaveLeave All----------------------------------------------2/1EnabledNormalEnabled200600100004/4EnabledNormalEnabled20060010000Aggregating PortsPort Aggregation optimizes port usage by linking a group of ports together to form a singleLink Aggregated Group (LAG). Port Aggregation multiplies the bandwidth between thedevices, increases port flexibility, and provides link redundancy. Both the PowerConnect3324 and PowerConnect 3348 support up to six LAGs, and eight ports per LAG per stack orstand-alone unit.Each LAG is composed of ports of the same speed, set to full-duplex operations. Ports in aLAG, can be of different media types (UTP/Fiber, or different fiber types), provided theyoperate at the same speed.show gvrp configuration[ethernet interface | port-channel port-channel-number]Displays GVRP configurationinformation, including timer values,whether GVRP and dynamic VLANcreation is enabled, and which ports arerunning GVRP.gvrp max-vlan number Configures the maximum number ofVLANs when GVRP is enabled.CLI Command Description
