126 Clockw w w . d e l l . c o m | s u p p o r t . d e l l . c o mD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LYUser Guidelines• Use the sntp client enable (Interface) Interface Configuration mode command to enable theSNTP client on a specific interface.ExamplesThe following example enables the SNTP broadcast clients.sntp anycast client enableThe sntp anycast client enable Global Configuration mode command enables SNTP anycastclient. To disable the SNTP anycast client, use the no form of this command.Syntaxsntp anycast client enableno sntp anycast client enableDefault ConfigurationThe SNTP anycast client is disabled.Command ModeGlobal Configuration modeUser Guidelines• Polling time is determined by the sntp client poll timer Global Configuration modecommand.• Use the sntp client enable (Interface) Interface Configuration mode command to enable theSNTP client on a specific interface.ExamplesThe following example enables SNTP anycast clients.sntp client enable (Interface)The sntp client enable Interface Configuration (Ethernet, port-channel, VLAN) modecommand enables the Simple Network Time Protocol (SNTP) client on an interface. Thisapplies to both receive broadcast and anycast updates. To disable the SNTP client, use the noform of this command.Console(config)# sntp broadcast client enableconsole(config)# sntp anycast client enable
