428 Web Serverw w w . d e l l . c o m | s u p p o r t . d e l l . c o mD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY• location — Specifies the location or city name. (Range: 1 - 64)• state — Specifies the state or province name. (Range: 1 - 64)• country — Specifies the country name. (Range: 2 - 2)• days — Specifies number of days certification is valid. (Range: 30 - 3650)Default ConfigurationThe Certificate and SSL’s RSA key pairs do not exist.If no certificate number is specified, the default certificate number is 1.If no RSA key length is specified, the default length is 1024.If no URL or IP address is specified, the default common name is the lowest IP address of thedevice at the time that the certificate is generated.If the number of days is not specified, the default period of time that the certification is validis 365 days.Command ModeGlobal Configuration modeUser Guidelines• The command is not saved in the device configuration; however, the certificate and keysgenerated by this command are saved in the private configuration (which is never displayed tothe user or backed up to another device).• Use this command to generate a self-signed certificate for the device.• If the RSA keys do not exist, parameter key-generate must be used.ExampleThe following example regenerates an HTTPS certificate.crypto certificate requestThe crypto certificate request Privileged EXEC mode command generates and displayscertificate requests for HTTPS.Syntaxcrypto certificate number request [cn common- name ][ou organization-unit][or organization][loc location] [st state] [cu country]• number — Specifies the certificate number. (Range: 1 - 2)Console(config)# crypto certificate 1 generate key-generate
