AAA Commands 81D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LYenable passwordThe enable password Global Configuration mode command sets a local password to control accessto user and privilege levels. To remove the password requirement, use the no form of this command.Syntaxenable password [level level] password [encrypted]no enable password [level level]• password — Password for this level (Range: 1-159 characters).• level — Level for which the password applies. If not specified the level is 15(Range: 1-15).• encrypted — Encrypted password entered, copied from another device configuration.Default ConfigurationNo enable password is defined.Command ModeGlobal Configuration modeUser GuidelinesThere are no user guidelines for this command.ExampleThe following example sets local level 15 password secret to control access to privilege levels.usernameThe username Global Configuration mode command creates a user account in the localdatabase. To remove a user name, use the no form of this command.Syntaxusername name [password password] [level level] [encrypted]no username name• name — The name of the user (Range: 1- 20 characters).• password — The authentication password for the user (Range: 1-159 characters).• level — The user level (Range: 1-15).• encrypted — Encrypted password entered, copied from another device configuration.Console(config)# enable password level 15 secret
