Dell PowerConnect 55xx Systems User Guide 191– Log Copy Files Events — Enable/disable generating logs when filesare copied.– Log Management Access Events — Enable/disable generating logswhen the device is accessed using a management method, forexample, each time the device is accessed using SSH, a device log isgenerated.4 To select the destination of logging messages, according to their severitylevels, check the minimum severity level that will be associated with theconsole log, RAM log, Log file (Flash memory) and remote SYSLOGservers. When a severity level is selected, all severity levels above theselection are selected automatically.Enabling Logs Using CLI CommandsThe following table summarizes the CLI commands for setting fieldsdisplayed in the Global Parameters page.Table 9-13. Global Log Parameters CLI CommandsCLI Command Descriptionlogging onno loggingEnables error message logging.Turns off error message logging.logging console levelno logging console levelLimits messages logged to theconsole, based on severity.Use the no form of this command todisable logging limiting to theconsole.logging file levelno logging fileLimits SYSLOG messages stored inflash memory, based on severity.Use the no form of this command tocancel using the buffer.file-system logging{copy|delete-rename}Enables the logging of file systemevents.
