Dell PowerConnect 55xx Systems User Guide 273– Console/Telnet/Secure Telnet Line Aging (1-365) — Check to set theamount of time in days that elapses before a line password is aged out.Enter the number of days after which the password expires.– Expiry Date — Displays the expiration date of the line password.– Lockout Status — Displays whether the user currently has access(status Usable), or whether the user is locked out due to too manyfailed authentication attempts since the user last logged insuccessfully (status Locked).– Reactivate Locked Line — Check to reactivate the line password for aConsole/Telnet/Secure Telnet session. Access rights can be suspendedafter a number of unsuccessful attempts to log in.Assigning Line Passwords Using CLI CommandsThe following table summarizes the CLI commands for setting fieldsdisplayed in the Line Password page.The following is an example of the CLI commands:Table 9-46. Line Password CLI CommandsCLI Command Descriptionline {console|telnet|ssh} Identifies a specific line for configurationand enters the Line Configurationcommand mode.password password[encrypted]no passwordSets a password on a line.Use the no form of this command toremove the password.console(config)# line consoleconsole(config-line)# password dell
