Dell PowerConnect 55xx Systems User Guide 275– Expiry Date — If Aging is selected, displays the expiration date of theenable password.– Lockout Status — Displays the number of failed authenticationattempts since the user last logged in successfully (if the EnableLogin Attempts checkbox is selected in the Password Managementpage.) Specifies LOCKOUT, when the user account is locked.– Reactivate Suspended User — Check to reactivate the specified user’saccess rights. Access rights can be suspended after unsuccessfullyattempting to login.Assigning Enable Passwords Using CLI CommandsThe following table summarizes the CLI commands for setting fieldsdisplayed in the Enable Password page.The following is an example of the CLI commands:TACACS+The device can act as a Terminal Access Controller Access Control System(TACACS+) client. TACACS+ provides centralized validation of usersaccessing the device, while still retaining consistency with RADIUS and otherauthentication processes.TACACS+ provides the following services:• Authentication — Provides authentication during login and via usernames and user-defined passwords.• Authorization — Performed at login after authentication. The TACACS+server checks the privileges of the authenticated user.Table 9-47. Enable Password CLI CommandsCLI Command Descriptionenable password [levellevel] d [encrypted]no enable password [levellevel]Sets a local password to control access touser and privilege levels.Use the no form of this command toremove the password requirement.console(config)# enable password level 15 secret
