Dell PowerConnect 55xx Systems User Guide 613– Start Frames Receive — The number of EAPOL Start frames receivedon the port.– Log off Frames Receive — The number of EAPOL Logoff framesreceived on the port.– Respond ID Frames Receive — The number of EAP Resp/ID framesreceived on the port.– Respond Frames Receive — The number of valid EAP Responseframes received on the port.– Request ID Frames Transmit — The number of EAP Req/ID framestransmitted via the port.– Request Frames Transmitted — The number of EAP Request framestransmitted via the port.– Invalid Frames Receive — The number of unrecognized EAPOLframes received on this port.– Length Error Frames Receive — The number of EAPOL frames withan invalid Packet Body Length received on this port.– Last Frame Version — The protocol version number attached to themost recently received EAPOL frame.– Last Frame Source — The source MAC address attached to the mostrecently received EAPOL frame.3 Select one of the Refresh Rate options to specify how frequently thestatistics should be refreshed.Viewing EAP Statistics Using the CLI CommandsThe following table summarizes the CLI commands for viewing EAPstatistics.Table 21-4. EAP Statistics CLI CommandsCLI Command Descriptionshow dot1x statistics Displays 802.1X statistics for thespecified interface.
