PowerConnect B-Series FCX Configuration Guide 124753-1002266-01Displaying 802.1X information 34Enabling 802.1X accountingTo enable 802.1X accounting, enter the following command.PowerConnect(config)#aaa accounting dot1x default start-stop radius noneSyntax: aaa accounting dot1x default start-stop radius | noneradius – Use the list of all RADIUS servers that support 802.1X for authentication.none – Use no authentication. The client is automatically authenticated without the device usinginformation supplied by the client.NOTEIf you specify both radius and none, make sure radius comes before none.Displaying 802.1X informationYou can display the following 802.1X-related information:• The 802.1X configuration on the device and on individual ports• Statistics about the EAPOL frames passing through the device• 802.1X-enabled ports dynamically assigned to a VLAN• User-defined and dynamically applied MAC address filters and IP ACLs currently active on thedevice• The 802.1X multiple-host configurationDisplaying 802.1X configuration informationTo display information about the 802.1X configuration on the Dell PowerConnect device, enter thefollowing command.Syntax: show dot1xThe following table describes the information displayed by the show dot1x command.PowerConnect#show dot1xPAE Capability: Authenticator Onlysystem-auth-control: Enablere-authentication: Disableglobal-filter-strict-security: Enablequiet-period: 60 Secondstx-period: 30 Secondssupptimeout: 30 Secondsservertimeout: 30 Secondsmaxreq: 2re-authperiod: 3600 SecondsProtocol Version: 1
