PowerConnect B-Series FCX Configuration Guide 50153-1002266-01Displaying VLAN information 13Displaying system-wide VLAN informationUse the show vlans command to display VLAN information for all the VLANs configured on thedevice.The following example shows the display for the IP subnet and IPX network VLANs configured in theexamples in “Configuring an IP subnet VLAN with dynamic ports” on page 466 and “Configuring anIPX network VLAN with dynamic ports” on page 467.In the show vlans output, ports that are tagged but are not dual-mode ports are listed as taggedports. In the following example display output, ports 7 and 8 are dual-mode ports in port-basedVLAN 4. Ports 7 and 8 also belong to port-based VLAN 3, but they are tagged ports only in VLAN 3and are not configured as dual-mode ports.PowerConnect# show vlansTotal PORT-VLAN entries: 2Maximum PORT-VLAN entries: 8legend: [S=Slot]PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree OffUntagged Ports: (S2) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16Untagged Ports: (S2) 17 18 19 20 21 22 23 24Untagged Ports: (S4) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16Untagged Ports: (S4) 17 18 19 20 21 22 23 24Tagged Ports: NonePORT-VLAN 10, Name IP_VLAN, Priority level0, Spanning tree OffUntagged Ports: (S1) 1 2 3 4 5 6Tagged Ports: NoneIP-subnet VLAN 1.1.1.0 255.255.255.0, Dynamic port enabledName: Mktg-LANStatic ports: NoneExclude ports: NoneDynamic ports: (S1) 1 2 3 4 5 6PORT-VLAN 20, Name IPX_VLAN, Priority level0, Spanning tree OffUntagged Ports: (S2) 1 2 3 4 5 6Tagged Ports: NoneIPX-network VLAN 0000ABCD, frame type ethernet_ii, Dynamic port enabledName: Eng-LANStatic ports: NoneExclude ports: NoneDynamic ports: (S2) 1 2 3 4 5 6
