756 PowerConnect B-Series FCX Configuration Guide53-1002266-01PIM Sparse251 239.255.163.1 99.99.99.52 239.255.163.2 99.99.99.53 239.255.163.3 99.99.99.54 239.255.162.1 99.99.99.55 239.255.162.2 43.43.43.16 239.255.162.3 99.99.99.5Syntax: show ip pim rp-mapThis display shows the following information.Displaying RP information for a PIM Sparse groupTo display RP information for a PIM Sparse group, enter the following command at any CLI level.Syntax: show ip pim rp-hash The parameter is the address of a PIM Sparse IP multicast group.This display shows the following information.Displaying the RP set listTo display the RP set list, enter the following command at any CLI level.Syntax: show ip pim rp-setTABLE 132 Output of show ip pim rp-mapThis field... Displays...Group address Indicates the PIM Sparse multicast group address using the listed RP.RP address Indicates the IP address of the Rendezvous Point (RP) for the listed PIM Sparse group.TABLE 133 Output of show ip pim rp-hashThis field... Displays...RP Indicates the IP address of the Rendezvous Point (RP) for the specified PIM Sparse group.Following the IP address is the port or virtual interface through which this Layer 3 Switch learnedthe identity of the RP.Info source Indicates the IP address on which the RP information was received.Following the IP address is the method through which this Layer 3 Switch learned the identity ofthe RP.PowerConnect#show ip pim rp-hash 239.255.162.1RP: 207.95.7.1, v2Info source: 207.95.7.1, through bootstrapPowerConnect#show ip pim rp-setGroup address Static-RP-address Override---------------------------------------------------Access-List 44 99.99.99.5 OnNumber of group prefixes Learnt from BSR: 1Group prefix = 239.255.162.0/24 #RPs expected: 1#RPs received: 1RP 1: 43.43.43.1 priority=0 age=0
