Option DescriptionNOTE: Depending on the number of installed CPUs, there may be up to fourprocessor listings.Number of Coresper ProcessorControls the number of enabled cores in each processor. This option is set to Allby default.Processor 64-bitSupportSpecifies if the processor(s) support 64-bit extensions.Processor CoreSpeedSpecifies the maximum core frequency of the processor.Processor 1 NOTE: Depending on the number of CPUs, there may be up to fourprocessors listed.The following settings are displayed for each processor installed in the system:Option DescriptionFamily-Model-SteppingSpecifies the family, model, and stepping of the processoras defined by Intel.Brand Specifies the brand name.Level 2 Cache Specifies the total L2 cache.Level 3 Cache Specifies the total L3 cache.Number of Cores Specifies the number of cores per processor.Related LinksProcessor SettingsViewing Processor SettingsSATA SettingsYou can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID onyour system.Related LinksSATA Settings detailsSystem BIOSViewing SATA SettingsViewing SATA SettingsTo view the SATA Settings screen, perform the following steps:1. Turn on, or restart your system.2. Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finishbooting, and then restart your system and try again.3. On the System Setup Main Menu screen, click System BIOS.4. On the System BIOS screen, click SATA Settings.64
