Miscellaneous SettingsYou can use the Miscellaneous Settings screen to perform specific functions such as updating the assettag and changing the system date and time.Related LinksMiscellaneous Settings detailsSystem BIOSViewing Miscellaneous SettingsViewing Miscellaneous SettingsTo view the Miscellaneous Settings screen, perform the following steps:1. Turn on, or restart your system.2. Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finishbooting, and then restart your system and try again.3. On the System Setup Main Menu screen, click System BIOS.4. On the System BIOS screen, click Miscellaneous Settings.Related LinksMiscellaneous SettingsMiscellaneous Settings detailsMiscellaneous Settings detailsThe Miscellaneous Settings screen details are explained as follows:Option DescriptionSystem Time Enables you to set the time on the system.System Date Enables you to set the date on the system.Asset Tag Specifies the asset tag and enables you to modify it for security and trackingpurposes.KeyboardNumLockEnables you to set whether the system boots with the NumLock enabled ordisabled. This option is set to On by default.NOTE: This option does not apply to 84-key keyboards.F1/F2 Prompt onErrorEnables or disables the F1/F2 prompt on error. This option is set to Enabled bydefault. The F1/F2 prompt also includes keyboard errors.Load LegacyVideo OptionROMEnables you to determine whether the system BIOS loads the legacy video (INT10H) option ROM from the video controller. Selecting Enabled in the operatingsystem does not support UEFI video output standards. This field is available only forUEFI boot mode. You cannot set the option to Enabled if UEFI Secure Boot modeis enabled.Related LinksMiscellaneous SettingsViewing Miscellaneous Settings73
