Dell PowerEdge R6615 9JNDF Installation And Service Manual

Table 57. System Profile Settings details (continued)Option DescriptionPower Profile Select High performance Mode(default): Favors core performance. All DF P-States are availablein this mode and the default DF P-State and DLWM algorithms are active. Efficiency Mode:Configures the system for power efficiency. Limits boost frequency available to cores andrestricts DF P-States available in the system. Maximum IO Performance Mode: Sets upDate Fabric to maximize IO sub-system performance.PCIE Speed PMM Control Reduce link speed when devices are idle. This option is set to Auto by default.EQ Bypass To Highest Rate Controls the ability to advertise Equalization Bypass to Highest Rate Support in TSxs sentprior to LinkUp=1r. This option is set to Disabled by default.DF PState FrequencyOptimizerDisabled: Disabled the DP P-state CCLK effective frequency optimizer. Enabled: Enablesthe DP P-state CCLK effective frequency optimizer. This option is set to Enabled by default.DF PState LatencyOptimizerDisabled: Disables the DP P-state latency optimizer. Enabled: Enables the DF P-statelatency optimizer. This option is set to Enabled by default.DF CState This field enables(0xF)/disables(0x0) DF Cstate. This option is set to Enabled by default.Host System ManagementPort(HSMP)SupportThis value controls Host System Management Port(HSMP) interface to provide OS-levelsoftware with access to system management functions via a set of mail box registers. Thisoption is set to Enabled by default.Boost FMax Boost Fmax. This option is set to 0 - Auto by default.Algorithm PerformanceBoost Disable (ApbDis)Enables or disables the Algorithm Performance Boost Disable (ApbDis). This option is set toDisabled by default.System SecurityTo view the System Security screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >System Security.Table 58. System Security detailsOption DescriptionCPU AES-NI Improves the speed of applications by performing encryption and decryption by usingthe Advanced Encryption Standard Instruction Set (AES-NI). This option is set toEnabled by default.System Password Sets the system password. This option is set to Enabled by default and is read-only ifthe password jumper is not installed in the system.Setup Password Sets the setup password. This option is read-only if the password jumper is not installedin the system.Password Status Locks the system password. This option is set to Unlocked by default.Table 59. System Security details (continued)Option DescriptionTPM Security This field controls the reporting of the Trusted Platform Module(TPM) in the system.When set to Off, the presence of the TPM is not reported to the OS.When set to Off, the presence of the TPM is not reported to the OS.When set to On, the presence of the TPM is reported to the OS.TPM Information Indicates the type of Trusted Platform Module, if present.TPM Firmware Indicates the firmware version of a Trusted Platform Module(TPM).TPM Heirachy Allows enabling, disabling or clearing the storage and endorsement hierarchies.Pre-operating system management applications 53