Dell PowerEdge R6615 9JNDF Installation And Service Manual

Table 62. Miscellaneous Settings details (continued)Option DescriptionDell Wyse P25/P45 BIOS Access Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set toEnabled by default.Power Cycle Request Enables or disables the Power Cycle Request. This option is set to None bydefault.iDRAC Settings utilityThe iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disablevarious iDRAC parameters by using the iDRAC settings utility.NOTE: Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License upgrade.For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at https://www.dell.com/idracmanuals.Device SettingsDevice Settings enables you to configure device parameters such as storage controllers or network cards.Dell Lifecycle ControllerDell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment,configuration, update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell systemembedded Unified Extensible Firmware Interface (UEFI) applications.Embedded system managementThe Dell Lifecycle Controller provides advanced embedded system management throughout the lifecycle of the system. The DellLifecycle Controller is started during the boot sequence and functions independently of the operating system.NOTE: Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware, and deploying theoperating system, see the Dell Lifecycle Controller documentation at https://www.dell.com/idracmanuals.Boot ManagerThe Boot Manager option enables you to select boot options and diagnostic utilities.To enter Boot Manager, power on the system and press F11.Table 63. Boot Manager detailsOption DescriptionContinue Normal Boot The system attempts to boot to devices starting with the first item in the bootorder. If the boot attempt fails, the system continues with the next item in theboot order until the boot is successful or no more boot options are found.One-shot UEFI Boot Menu Enables you to access boot menu, where you can select a one-time boot deviceto boot from.Launch System Setup Enables you to access System Setup.Launch Lifecycle Controller Exits the Boot Manager and invokes the Dell Lifecycle Controller program.58 Pre-operating system management applications