Thermal SensorRemoving The Thermal SensorCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet andperipherals.2. Lay the system on its side, on a flat and stable surface.3. Open the system.4. Disconnect the thermal-sensor connector from the system board.5. Remove the thermal-sensor cable from the chassis clip.6. Press the tabs on the thermal sensor and remove the thermal sensor from the chassis.Figure 9. Removing and Installing the Thermal Sensor1. thermal sensor2. tabs (2)3. chassis clip4. thermal-sensor connectorInstalling The Thermal SensorCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet andperipherals.2. Lay the system on its side, on a flat and stable surface.32
