Dell PowerEdge T20 Owner's Manual

Also see for PowerEdge T20: Features Technical guide Getting started guide Owner's manual Getting started guide

Contents

CAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet andperipherals.2. Lay the system on its side, on a flat and stable surface.3. Open the system.4. Locate the memory-module socket(s).5. Press the ejectors on the memory module socket down and out to allow the memory module to be inserted into thesocket.CAUTION: Handle each memory module only by the card edges, making sure not to touch the middle of thememory module or gold contacts.6. Align the memory module's edge connector with the alignment key of the memory module socket, and insert thememory module in the socket.NOTE: The memory module socket has an alignment key that allows you to install the memory module in thesocket in only one way.7. Press down on the memory module with your thumbs until the socket levers latch into a locked position.When the memory module is properly seated in the socket, the levers on the memory module socket align with thelevers on the other sockets that have memory modules installed.8. Repeat step 5 through step 7 of this procedure to install the remaining memory modules.9. Close the system.10. Place the system upright on a flat, stable surface.11. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.12. Press to enter the System Setup, and check the memory settings.The system should have already changed the value to reflect the newly installed memory.13. If the value is incorrect, one or more of the memory modules may not be installed properly. Repeat step 5 throughstep 7 of this procedure, checking to ensure that the memory modules are firmly seated in their sockets.14. Run the appropriate diagnostic test.For more information, see Using System Diagnostics.System FanYour system supports one system fan.Removing The System FanCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.CAUTION: Never operate your system with the system fan removed. System can overheat and result in shutdownof the system and loss of data.50