Dell PowerVault DL4000 Owner's Manual

Also see for PowerVault DL4000: Deployment guide Handbook Deployment guide Release note Getting started guide

Contents

Figure 28. Cabling Diagram—2.5 Inch Systems1. cable retention bracket2. system board3. integrated storage controller card4. SAS connector on system board5. SAS backplane expander cardInstalling The Hard-Drive BackplaneCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Holding the blue tabs, align the slots on the hard-drive backplane with the tabs on the chassis.2. Slide down the hard-drive backplane until the release tabs snaps into place.3. Attach the SAS A cable to the SAS A connector on the hard-drive backplane and the SAS B cable to the SAS Bconnector.4. Connect the power cable(s) to the hard-drive backplane.60