Script Commands 163NOTE: When you use this command, you can specify any combination of theparameters for global setting, virtual disk configuration setting, host topology, orLUN mapping. To enter all settings, use the allConfig parameter. The parameters areoptional; you do not have to enter any parameters.Save Storage Array EventsThis command saves events from the Major Event Log (MEL) to a file. Youcan save either all the events or only the critical events.Syntaxsave storageArray (allEvents | criticalEvents)file="filename" [count=numberOfEvents]allConfig Saves all of the configuration values to the file. (If youchoose this parameter, all of the configurationparameters are set to TRUE.)globalSettings Saves the global settings to the file. To save the globalsettings, set this parameter to TRUE. To prevent savingthe global settings, set this parameter to FALSE. Thedefault value is TRUE.virtualDiskConfigAndSettingsSaves the virtual disk configuration settings and all ofthe global settings to the file. To save the virtual diskconfiguration and global settings, set this parameter toTRUE. To prevent saving the virtual disk configurationand global settings, set this parameter to FALSE. Thedefault value is TRUE.hostTopology Saves the host topology to the file. To save the hosttopology, set this parameter to TRUE. To prevent savingthe host topology, set this parameter to FALSE. Thedefault value is FALSE.lunMappings Saves the LUN mapping to the file. To save the LUNmapping, set this parameter to TRUE. To preventsaving the LUN mapping, set this parameter to FALSE.The default value is FALSE.Parameter Description
