88 Using the Virtual Disk Copy FeatureNOTICE: If the virtual disk copy has a status of In Progress, you must stop thevirtual disk copy before you can remove the virtual disk copy pair from the storagearray configuration.The following syntax is the general form of the command:remove virtualDiskCopy target [targetName] [source[sourceName]]The following example shows a command to remove a virtual disk copy pair:client>smcli 123.45.67.89 -c "removevirtualDiskCopy target [\"Obi_1\"];"The following example is the script file version of the command:remove virtualDiskCopy target ["Obi_1"];Interaction with Other FeaturesYou can run the Virtual Disk Copy feature while running the followingfeatures:• Storage Partitioning• Snapshot Virtual DisksWhen running the Virtual Disk Copy feature with other features, you musttake the requirements of other features into consideration to ensure you setup a stable storage array configuration.You can also run the Virtual Disk Copy feature while running DynamicVirtual Disk Expansion.Storage PartitioningStorage partitioning enables hosts to share access to virtual disks in a storagearray. You create a storage partition when you define the following storagearray assignments:• A host• A host group• Virtual disk-to-logical unit number (LUN) mappingThe virtual disk-to-LUN mapping enables you to define which host group orhost has access to a particular virtual disk in the storage array.
