184 Script CommandsNOTE: When using this command, you can specify one or more of the optionalparameters. You do not, however, need to use all of the parameters.Set Storage Array Enclosure PositionsThis command defines the position of the enclosures in a storage array. Youmust include all enclosures in the storage array when you enter thiscommand.Syntaxset storageArray enclosurePositions=(enclosure-id-list)ParametersNOTE: This command defines the position of an enclosure in a storage array by theposition of the enclosure ID in the enclosurePositions list. For example, if you havea RAID enclosure with an ID set to 84 and expansion enclosures with IDs set to 1and 12, the enclosurePositions sequence (84 1 12) places the RAID enclosure in thefirst position, expansion enclosure 1 in the second position, and expansionenclosure 12 in the third position. The enclosurePositions sequence (1 84 12) placesthe RAID enclosure in the second position, expansion enclosure 1 in the firstposition, and expansion enclosure 12 in the third position.Set Storage Array ICMP ResponseThis command returns the default values for negotiable settings for sessionsand connections, which represent the storage array’s starting point fornegotiations.Syntaxset storageArray icmpPingResponse = (TRUE | FALSE)Parameter DescriptionenclosurePositions List of enclosure IDs. The sequence of themodule IDs in the list define the positions forthe RAID enclosure and expansion enclosures ina storage array. Valid values are 0 to 99. Separatethe enclosure ID values with a space, and putparentheses around the list of enclosure IDs.
