198 Script CommandsParametersShow Physical Disk Channel StatisticsThis command shows cumulative physical disk channel data transfer anderror information. If the RAID controller module has automatically degradeda channel, this command also shows interval statistics. When using thiscommand, you can display information about one specific physical diskchannel, several physical disk channels, or all physical disk channels.Parameter DescriptionallPhysicalDisks Returns information about all physical disks inthe storage array.NOTE: To determine information about the typeand location of all physical disks in the storagearray, use the allPhysicalDisks parameter.physicalDiskType Specifies the type of physical disk for which toretrieve information. Valid physical disk types areSAS or SATA.NOTE: To determine the information about the SASor SATA physical disks in the storage array, use thephysicalDiskType parameter.physicalDisk or physicalDisks Identifies the enclosure and slot where thephysical disk resides. You can enter enclosure IDsand slot IDs for one or several physical disks.Enclosure ID values are 0 to 99. Slot ID valuesare 0 to 31. You must put parentheses around theenclosure ID values and the slot ID values.summary Returns the status, capacity, data rate, productID, and firmware version for the specifiedphysical disks.NOTE: To determine the type of physical disk in aspecific location, use the physicalDisk parameter,and enter the enclosure and slot IDs for thephysical disk.
