Script Commands 187ParameterNOTE: The iSNS protocol facilitates the automated discovery, management, andconfiguration of iSCSI and Fibre Channel devices on a TCP/IP network. The iSNSprotocol provides intelligent storage discovery and management servicescomparable to those found in Fibre Channel networks, allowing a commodity IPnetwork to function in a similar capacity as a storage area network. The iSNSprotocol also facilitates a seamless integration of IP and Fibre Channel networks,due to its ability to emulate Fibre Channel fabric services, and manage both iSCSIand Fibre Channel devices.Set Storage Array iSNS Server Listening PortThis command sets the iSNS server listening port.Syntaxset storageArray isnsListeningPort =integerParameterNOTE: A listening port resides on the database server and is responsible forlistening (monitoring) for incoming client connection requests and managing thetraffic to the serverNOTE: When a client requests a network session with a server, a listener receivesthe actual request. If the client information matches the listener information, thenthe listener grants a connection to the database server.Example-c "set storageArray isnsListeningPort = 3205;"Parameter DescriptionisnsIPV6Address IPv6address you want to use for the iSNSserverParameter DescriptionisnsListeningPort The IP address that you want to use forthe iSNS server listening port. The rangeof values for the listening port is 49152 to65535. The default value is 3205.
