5-4 Dell Workstation Mini Tower Systems User’s Guide10. Insert the NIC driver diskette 2 into drive A, andselect Yes (Recommended).11. Click Next and then click Finish to access theInsert Disk dialog box.12. Click OK to access the Copying Files dialog box.Type a:\, and then click OK.The Windows 95 operating system begins to copyfiles to the system’s hard-disk drive.13. When you are prompted for the location of addi-tional files, specify the c:\windows\options\cabsdirectory on your hard-disk drive or the \win95directory on your CD-ROM drive. Then click OKto access the System Properties dialog box.The Windows 95 operating system finishes copyingall of the files to the system’s hard-disk drive.14. When the System Settings Change dialog boxappears, remove the diskette from drive A andclick Yes to restart the system.15. When the system restarts, the Enter NetworkPassword dialog box appears. Enter the user-name and password you want to use for networkaccess.See your Windows 95 documentation for informa-tion about usernames and passwords.Windows 95 Operating Systems NotInstalled by DellTo reinstall the NIC driver in a system running a Win-dows 95 operating system not installed by Dell, performthe following steps:1. Use the Dell DiskMaker program (located in theDell Accessories program folder) to make a dis-kette copy of the NIC drivers installed on yourhard-disk drive.2. Connect the network cable to the back of yourcomputer.See “Network Cable Requirements” found earlier inthis chapter for detailed instructions.3. Verify that the integrated NIC is enabled andconnected to its network.See “NIC” in Chapter 3 for more information.4. Start the Windows 95 operating system.5. Click the Start button, point to Settings, and clickthe Control Panel. Then double-click the Systemicon.6. In the System Properties window, click the DeviceManager tab. In the list of system devices, double-click Other Devices. Then select PCI EthernetController, and click Properties to access the PCIEthernet Controller window.7. Select the Driver tab, and then click ChangeDriver to access the Select Hardware Type dialogbox.8. Select Network Adapter, and then click OK toaccess the Select Device window.9. Click Have Disk to access the Install From Diskdialog box.10. Insert the NIC driver diskette 2 into drive A, andclick OK.The system reads the files on diskette and then dis-plays the Select Network Adapters window.11. Select 3Com Fast EtherLink XL 10/100MbEthernet Adapter, and click OK to access the PCIEthernet Controller Properties dialog box.12. Click OK to access the Network dialog box. Enteryour computer name and workgroup/domain.Then click Close.13. Click OK in the Insert Disk dialog box.14. When prompted for the location of additionalfiles, specify the c:\windows\options\cabs directoryon your hard-disk drive or the \win95 directoryon your CD-ROM drive. Then click OK to accessthe System Properties dialog box, and click OK.15. Remove the diskette from drive A. Click the Startbutton, click Shutdown, and then select Restartthe Computer.16. Click Yes when prompted to restart the system.
