38 Using the Keyboard and Touch Padw w w . d e l l . c o m | s u p p o r t . d e l l . c o mTouch PadThe touch pad detects the pressure and movement of your finger to allow you to move the cursoron the display. Use the touch pad and touch pad buttons as you would use a mouse.• To move the cursor, lightly slide your finger over the touch pad.• To select an object, lightly tap once on the surface of the touch pad or use your thumb topress the left touch-pad button.• To select and move (or drag) an object, position the cursor on the object and tap twice on thetouch pad. On the second tap, leave your finger on the touch pad and move the selectedobject by sliding your finger over the surface.• To double-click an object, position the cursor on the object and tap twice on the touch pad oruse your thumb to press the left touch-pad button twice.Customizing the Touch PadYou can use the Mouse Properties window to disable the touch pad or adjust their settings.1 Open the Control Panel, click Printers and Other Hardware, and then click Mouse. Forinformation about the Control Panel, see the Windows Help and Support Center. To accessthe Help and Support Center, see page 13.2 In the Mouse Properties window, click the Touch Pad tab to adjust touch pad settings.3 Click OK to save the settings and close the window.1 touch pad1book.book Page 38 Wednesday, October 26, 2005 1:00 PM
