148 Removing and Installing PartsProcessor Airflow ShroudCAUTION: Before you perform this procedure, follow the safety instructionslocated in the Product Information Guide.Removing the Processor Airflow Shroud Assembly1 Follow the procedures in "Before You Begin" on page 99.2 Remove the computer cover (see "Removing the Computer Cover" onpage 101).CAUTION: The processor heat sink can get very hot during normal operation. Besure that the heat sink has had sufficient time to cool before you touch it.3 Disconnect the fan cable from the FAN_CPU connector on the systemboard (see "System Board Components" on page 103).1 processor airflow shroud 2 captive screws (2)21book.book Page 148 Tuesday, November 27, 2007 10:29 AM
