Removing the TV-In Port | 10346 Removing the TV-In PortWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 11. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 13. For additional safety best practicesinformation, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.Prerequisites1 Remove the back cover. See "Removing the Back Cover" on page 19.2 Remove the stand. See "Removing the Stand" on page 47.3 Remove the trim cover. See "Removing the Trim Cover" on page 87.4 Remove the I/O panel. See "Removing the I/O Panel" on page 91.5 Remove the system-board shield. See "Removing the System-Board Shield" onpage 31.6 Remove the inner frame. See "Removing the Inner Frame" on page 95.7 Follow step 1 to step 6 in "Removing the I/O-Board" on page 99.Procedure1 Remove the screws that secure the TV-in port to the I/O-board bracket.2 Slide and remove the TV-in port through the slot on the I/O bracket.1 screws (2) 2 TV-in port3 TV-in port cable213
