System Setup | 15770 System SetupOverviewUse system setup to:• Get information about the hardware installed in your computer, such as theamount of RAM, the size of the hard drive, and so on• Change the system configuration information• Set or change a user-selectable option, such as the user password, type of harddrive installed, enabling or disabling base devices, and so onCAUTION: Unless you are an expert computer user, do not change the settings inthe system setup program. Certain changes can make your computer workincorrectly.NOTE: Before you change system setup, it is recommended that you write downthe system setup screen information for future reference.Entering System Setup1 Turn on (or restart) your computer.2 During POST, when the DELL logo is displayed, watch for the F2 prompt to appearand then press immediately.NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt canappear very quickly, so you must watch for it, and then press . If you press before the F2 prompt, this keystroke is lost. If you wait too long and the operatingsystem logo appears, continue to wait until you see the operating system’s desktop.Then, turn off your computer and try again.
