Replacing the Inner Frame | 9743 Replacing the Inner FrameWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 11. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 13. For additional safety best practicesinformation, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.Procedure1 Align the screw holes on the inner frame with the screw holes on the computerbase.NOTE: Ensure that all cables are routed through their routing guides andno cables are placed between the inner frame and the computer base.2 Replace the screws that secure the inner frame to the computer base.Postrequisites1 Replace the I/O panel. See "Replacing the I/O Panel" on page 93.2 Replace the trim cover. See "Replacing the Trim Cover" on page 89.3 Replace the system-board shield. See "Replacing the System-Board Shield" onpage 33.4 Replace the stand. See "Replacing the Stand" on page 49.5 Replace the back cover. "Replacing the Back Cover" on page 21.
