Removing the Converter Board | 236 Removing the Converter BoardWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 11. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 13. For additional safety best practicesinformation, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.Prerequisites1 Remove the back cover. See "Removing the Back Cover" on page 19.Procedure1 Lift the securing tab on the display-backlight cable connector and then disconnectthe display-backlight cable from the convertor board.2 Disconnect the converter cable from the converter board.3 Remove the screws that secure the converter board to the computer base.4 Lift the converter board off the computer base.1 screws (2) 2 converter cable3 converter board 4 display-backlight cable4231