Button DescriptionLeft Moves the cursor back in one-step increments.Select Selects the menu item highlighted by the cursor.Right Moves the cursor forward in one-step increments.During message scrolling:• Press once to increase scrolling speed• Press again to stop• Press again to return to the default scrolling speed• Press again to repeat the cycleHome screenThe Home screen displays user-configurable information about the system. This screen is displayedduring normal system operation when there are no status messages or errors. When the system is instandby mode, the LCD backlight turns off after five minutes of inactivity if there are no error messages.Press one of the three navigation buttons (Select, Left, or Right) to view the Home screen.To navigate to the Home screen from another menu, complete the following steps:1. Press and hold the up arrow until the Home icon is displayed.2. Select the Home icon.3. From the Home screen, press the Select button to enter the main menu.Setup menuNOTE: When you select an option in the Setup menu, you must confirm the option beforeproceeding to the next action.Option DescriptioniDRAC Select DHCP or Static IP to configure the network mode. If Static IP is selected,the available fields are IP, Subnet (Sub), and Gateway (Gtw). Select Setup DNS toenable DNS and to view domain addresses. Two separate DNS entries are available.Set error Select SEL to view LCD error messages in a format that matches the IPMIdescription in the SEL. This is useful when trying to match an LCD message with anSEL entry.Select Simple to view LCD error messages in a simplified user-friendly description.For more information about error messages, see the Dell Event and Error MessagesReference Guide at Dell.com/openmanagemanuals > OpenManage software.Set home Select the default information to be displayed on the Home screen. See View menufor the options and option items that can be set as the default on the Homescreen.18
