Denon AVR-1802 Operating Instructions Manual

Also see for AVR-1802: Operating instructions Brochure & specs Operating instructions Service manual Operating instructions

Contents

177 Set the various surround parameters.ON OFFor orSELECT SELECTCINEMA EQ OFF• CINEMA EQ settingON OFFor orSELECT SELECTPANORAMA OFF• PANORAMA setting0 3 6or orSELECT SELECTDIMENSION 3• DIMENSION setting0CENTER WIDTH O4 7or orSELECT SELECT• CENTER WIDTH settingYes Y/N Noor orSELECT SELECTDEFAULT Y/N• DEFAULT settingSelect “Yes” to reset to the factory defaults.Stop pressing buttons once you have completedsetting the surround parameters. After severalseconds the normal display reappears and thesettings you have made are automatically set.NOTE:• When making parameter settings, the display will return to the regular condition several seconds after the lastbutton was pressed and the setting will be completed.Surround parameters qPro Logic II Mode:The Cinema mode is the standard required mode for all A/V systems.The Music mode is recommended as the standard mode for autosound music systems (no video), and isoptional for A/V systems.The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the sourcecontents is not of optimum quality.Select one of the modes (“Cinema”, “Music” or “Pro Logic”).Panorama Mode:This mode extends the front stereo image to include the surround speakers for an exciting “wraparound”effect with side wall imaging.Select “OFF” or “ON”.Dimension Control:This control gradually adjust the soundfield either towards the front or towards the rear.The control can be set in 7 steps from 0 to 6.Center Width Control:This control adjust the center image so it may be heard only from the center speaker; only from the left/rightspeakers as a phontom image; or from all three front speakers to varying degrees.The control can be set in 8 steps from 0 to 7.Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)1 Select the input source.DVD/VDP3(Main unit) (Remote control unit)q Select an input source set to digital (COAXIAL/OPTICAL) (see page 11).Playback with a digital inputB1 31 4 22EX:ENGLISH8(Main unit) (Remote control unit)w Set the input mode to “AUTO” or “DTS”.2 Select the Dolby/DTS Surround mode.SURROUNDMODEWhen performing this operation from the mainunit’s panel, press the SURROUND MODEbutton, then press the SELECT knob and select“DOLBY/DTS”.• The following appears on the display.(DOLBY PLII, DOLBY PROLOGIC, DOLBYDIGITAL, DTS)SELECT(Remote control unit)(Main unit)3 Play a program source with the , mark.• The Dolby Digital indicatorlights when playing DolbyDigital sources.DIGITALLight • The DTS indicator lights whenplaying DTS sources.LightBDVD/VDPCDPHONOTV/DBSVCR-1 VCR-2SURROUNDMODETUNER SHIFTREMOTE CONTROL UNIT RC-897STATUS MUTINGT.TONEMASTERVOLTITLEDISC SKIP+V. AUXINPUT MODE CDR / TAPECHANNEL TVCD·MD/CDR·DVD/VDPVIDEO SELECTSYSTEMSET UP MENUSELECTRETURN DISPLAYSURROUNDCH SELECTVOLUMECHANNELAVR/AVC DVD/VDPTV VCRAUDIOCD MD/CDRVIDEOPOWERTAPE·VCROFFON30026 798236 78495106273114, 5, 6, 724, 5, 6, 7Set the surround parameter according to the source.First, press the SURROUND button.MENUSURROUND4(Remote control unit)NOTE: Please make sure the“AUDIO” position of theslide switch on theremote control unit.Use the (left) and(right) buttons to set theCINEMA EQ.ON OFFCINEMA EQ OFFPress the SURROUND or (down) button to switch to the D. COMP.setting.MENUSURROUND(Remote control unit)(Remote control unit)(right) button(left) button(Initial)The CINEMA EQ mode can be set directlyusing the main unit’s CINEMA EQ button.(Main unit)• CINEMA EQ mode turns onand off each times theCINEMA EQ button ispressed.