Denon AVR-1802 Operating Instructions Manual

Also see for AVR-1802: Operating instructions Brochure & specs Operating instructions Service manual Operating instructions

Contents

20Surround parameters eROOM SIZE:This sets the size of the sound field.There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”.“small” recreates a small sound field, “large” a large sound field.EFFECT LEVEL:This sets the strength of the surround effect.The level can be set in 15 steps from 1 to 15. When the surround mode is set to “VIRTUAL”, the effectlevel can be set in steps from 1 to 10. Lower the level if the sound seems distorted.DELAY TIME:In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.2 Surround modes and parametersChannel outputBBBBBBBBBBBBSUB-WOOFEREBBBBBBBBBBESURROUNDL/REBBBBBBBBBBECENTERCCCCCCCCCCCCFRONTL/RModeSTEREOEXTERNAL INPUTDOLBY PRO LOGIC IIDOLBY DIGITALDTS SURROUND5CH STEREOROCK ARENAJAZZ CLUBVIDEO GAMEMONO MOVIEMATRIXVIRTUALC : SignalE : No signalB : Turned on or off by speakerconfiguration settingC : AbleE : UnableWhenplayingDolbyDigitalsignalsCEC *CEEEEEEECWhenplayingDTSsignalsCEEECEEEEEEESURROUND PARAMETERParameter (default values are shown in parentheses)DTSsignalsD.COMP.C (OFF)EC (OFF)C (OFF)EEEEEEEC (OFF)EEEEEEEEEEC (30msec)EDELAYTIMEEEEEEEC (10)C (10)C (10)C (10)EC (10)EFFECTLEVELEEEEEEC (Medium)C (Medium)C (Medium)C (Medium)EEROOMSIZEC (0dB)C (0dB)C (0dB)C (0dB)C (0dB)C (0dB)C (0dB)C (0dB)C (0dB)C (0dB)C (0dB)C (0dB)TONECONTROLModeSTEREOEXTERNAL INPUTDOLBY PRO LOGIC IIDOLBY DIGITALDTS SURROUND5CH STEREOROCK ARENAJAZZ CLUBVIDEO GAMEMONO MOVIEMATRIXVIRTUALC : AdjustableE : Not adjustableLFEC (0dB)EC (0dB)C (0dB)–EEEEEEC (0dB)WhenplayingPCMsignalsCECEECCCCCCCWhenplayingANALOGsignalsCCCEECCCCCCC* Only for 2 ch contents.EEC (CINEMA )EEEEEEEEEMODEEEC (OFF )EEEEEEEEEPANORAMAEEC (3)EEEEEEEEEDIMENSIONEEC (0)EEEEEEEEECENTERWIDTHEEC (OFF)C (OFF)C (OFF)EEEEEEECINEMAEQ LFEC (0dB)E––C (0dB)EEEEEEEDolby Digital signalsPRO LOGIC IIMUSIC MODE ONLYENGLISH15 LISTENING TO THE RADIOAuto preset memoryThis unit is equipped with a function for automatically searching for FM broadcast stations and storing them in thepreset memory.1 When the main unit’s power operation switchturn on while pressing the set’s MEMORY buttonthe unit automatically begins searching for FMbroadcast stations.2 When the first FM broadcast station is found, thatstation is stored in the preset memory at channelA1. Subsequent stations are automatically storedin order at preset channels A2 to A8, B1 to B8, C1to C8, D1 to D8 and E1 to E8, for a maximum of40 stations.3 Channel A1 is tuned in after the auto presetmemory operation is completed.NOTES:• If an FM station cannot be preset automaticallydue to poor reception, use the “Manual tuning”operation to tune in the station, then preset itusing the manual “Preset memory” operation.• To interrupt this function, press the poweroperation switch.B112 DEFAULT VALUEAUTO TUNER PRESETSA1 ~ A8 87.5/89.1/98.1/108/90.1/90.1/90.1/90.1 MHzB1 ~ B8 522/603/999/1404/1611 kHz/90.1/90.1/90.1 MHzC1 ~ C8 90.1 MHzD1 ~ D8 90.1 MHzE1 ~ E8 90.1 MHz(Main unit)