Denon AVR-2311 Owner's Manual

Also see for AVR-2311: Service manual Service manual Owner's manual

Contents

41ENGLISH Basic versionSimple version InformationAdvanced versionConvenient functionsQuick select functionAll of the settings in step 1 can be memorized together. By memorizingfrequently used settings, you can quickly access and enjoy a playbackenvironment that is consistently the same.n Saving the settings1 Set the items below to the settings you want to save.q Input source (vpage 21)w Volume (vpage 21)e Surround mode (vpage 29)r Video Select (vpage 50)t Audyssey Setting(MultEQ®, Dynamic EQ®, DynamicVolume®) (vpage 55)2 Press and hold the desired QUICK SELECT until“Memory” appears on the display.The current settings will be memorized.GQuick Select DefaultsHInput source VolumeQUICK SELECT 1 BD –40 dBQUICK SELECT 2 SAT/CBL –40 dBQUICK SELECT 3 DOCK –40 dBn Recalling the settingsPress QUICK SELECT at which thesettings you want to call out are saved.The , or indicator illuminates onthe display.Naming quick select settingsSee “Quick Select Name” (vpage 65).• The Quick Select function can be set separately for the differentzones (vpage 43 “Quick select function”).• If QUICK SELECT on the main unitis pressed, the same function aswith the remote control unit can beobtained.NOTEInput sources stored with the quick select function cannot be selectedif they have been deleted at “Source Delete” (vpage 64). In this case,store them again.REC OUT modeWhen using the audio/video recording connectors (DVR outputs), youcan record the audio or video from a different program source whilelistening to the currently played track.1 Press ZONE2/REC SELECT.“ZONE2 Source” is shown on the display.2 Turn SOURCE SELECT until “RECOUTSource” is displayed.The indicator illuminates.ZONE2 Source ZONE2 TUNER ZONE2 USB/iPod····RECOUT USB/iPod RECOUT DOCK RECOUT Source····3 Turn SOURCE SELECT to choose the input source tobe recorded.• For operating instructions, refer to the respective equipment’soperating instructions.• To record FM or AM broadcasts, select the broadcast (vpage 25).4 Start recording.• For operating instructions, refer to the respective equipment’soperating instructions.• To cancel, press ZONE2/REC SELECT, then turn SOURCE SELECTuntil “ZONE2 Source” is displayed.• Make a test recording before starting the actual recording.• The digital signals are not output to the analog REC OUT connectors.• As the digital audio signal input from the HDMI connector is notoutput to the digital recording connector (OPTICAL), you shouldconnect using the OPTICAL and COAXIAL connectors.• Sources selected with the REC OUT mode are output from ZONE2as well.• The operable buttons on the remote control unit in REC OUT modewhile it is in the operating mode for ZONE2 are as follows:• ZONE/DEVICE power button• Muting button• Master volume control buttonNOTE• Recordings you make are for your personal enjoyment and shouldnot be used for other purposes without permission of the copyrightholder.• Input sources for which “Delete” is selected at “Source Delete”(vpage 64) cannot be selected.