87ENGLISH Basic version Advanced versionSimple version InformationSpecificationsn Audio section• Power amplifierRated output: Front:105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Center:105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Surround:105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Surround back:105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Output connectors: 6 – 16 Ω• AnalogInput sensitivity/Input impedance: 200 mV/47 kΩFrequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)S/N: 100 dB (IHF–A weighted, DIRECT mode)Distortion: 0.005 % (20 Hz – 20 kHz) (DIRECT mode)Rated output: 1.2 V• DigitalD/A output: Rated output — 2 V (at 0 dB playback)Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)S/N ratio — 102 dBDynamic range — 100 dBDigital input: Format — Digital audio interfacen Video section• Standard video connectorsInput/output level and impedance: 1 Vp-p, 75 ΩFrequency response: 5 Hz – 10 MHz — +1, –3 dB• Color component video connectorInput/output level and impedance: Y (brightness) signal — 1 Vp-p, 75 ΩPB / CB signal — 0.7 Vp-p, 75 ΩP R / CR signal — 0.7 Vp-p, 75 ΩFrequency response: 5 Hz – 60 MHz — +0, –3 dB (when “Video Convert” set to “OFF”)n Tuner section [FM] [AM](Note: μV at 75 Ω, 0 dBf = 1 x 10 –15 W)Receiving Range: 87.5 MHz – 108.0 MHz 522 kHz – 1611 kHzUsable Sensitivity: 1.2 μV (12.8 dBf) 18 μV50 dB Quieting Sensitivity: MONO 2.0 μV (17.3 dBf)STEREO 42 μV (34.5 dBf)S/N (IHF-A): MONO 72 dBSTEREO 67 dBTotal harmonic Distortion (at 1 kHz): MONO 0.3 %STEREO 0.7 %n GeneralPower supply: AC 230 V, 50 HzPower consumption: 600 W0.1 W (Standby)1.9 W (CEC standby)Maximum external dimensions: 434 (W) x 171 (H) x 381 (D) mmWeight: 11.0 kgn Remote Control Unit (RC-1146)Batteries: R6/AA Type (two batteries)Maximum external dimensions: 53 (W) x 224 (H) x 28 (D) mmWeight: 160 g (including batteries)For purposes of improvement, specifications and design are subject to change without notice.