Denon AVR-2311CI Owner's Manual

Also see for AVR-2311CI: Service manual Service manual Owner's manual Owner's manual Specifications

Contents

38ENGLISHn HDMI control function (vpage 38)n Sleep timer function (vpage 39)n Adjusting the volume of the speakers (vpage 39)n Quick select function (vpage 40)n REC OUT mode (vpage 40)n Various memory functions (vpage 41)Playback (Basic operation) (vpage 21)Selecting a listening mode (Surround mode)(vpage 28)Playback (Advanced operation)Convenient functionsHDMI control functionWhen you make an HDMI connection with a TV or player compatiblewith this unit and HDMI control functions, you can perform thefollowing operations by setting the HDMI control function of eachdevice.n This unit power off can be linked to the TV power offstep.n You can switch audio output devices with a TVoperation.When you set “Output audio from amp” in the TV audio outputsetup operation, you can switch the amp power on.n You can adjust this unit volume in the TV volumeadjustment operation.n You can switch this unit input sources throughlinkage to TV input switching.n When playing the player, this unit input sourceswitches to the source for that player.NOTE• When “HDMI Control” is set to “ON”, it consumes morestandby power.• The HDMI control function controls operations of a TV that iscompatible with the HDMI control function. Make sure that the TVand HDMI are connected when you perform HDMI control.• Some functions may not operate depending on the connected TVor player. Check the owner’s manual of each device for detailsbeforehand.• When “Power Off Control” on the menu is set to “OFF” (vpage 60),this unit is not set to standby even if the connected device is in thestandby mode.• When connection changes are implemented, such as addingconnections to HDMI devices, linked operations may be initialized.In this case, you will need to reconfigure the settings.• When “HDMI Control” is set to “ON”, it is not possible to assign anHDMI connector to “TV” at “Input Assign” (vpage 48).1 % >3 >3!Set “HDMI Control” (vpage 60) to “ON“.2 !! 5 '>3 ! 3 % >3 ! !! 5 '>3 ! • Please consult the operating instructions for the connectedequipment to check the settings.• Carry out steps 1 and 2 should any of the equipment be unplugged.4 % ! * >3 5 % >3 & ! ' &6 9 ' 2 '$ & ! 'If the HDMI control function does not operate properly, check thefollowing points.• Is the TV or player compatible with the HDMI control function?• Is “HDMI Control” (vpage 60) set to “ON”?• Is “Power Off Control” (vpage 60) set to “All” or “Video”?• Are the HDMI control function settings of all equipment correct?NOTEShould any of the operations below be performed, the interlockingfunction may be reset, in which case, repeat steps 2 and 3.• “Input Assign” – “HDMI” (vpage 48) setting has changed.• There is a change to the connection between the equipment and theHDMI, or an increase in equipment.