Denon AVR-2311CI Owner's Manual

Also see for AVR-2311CI: Service manual Service manual Owner's manual Owner's manual Specifications

Contents

56ENGLISHAudio/Video AdjustRemote control operationbuttonsMove the cursor(Up/Down/Left/Right) Confirm the setting Return to previous menun RESTORERCompressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reducethe amount of data by eliminating signal components that are hard for the human ear to hear. TheRESTORER function generates the signals eliminated upon compression, restoring the sound toconditions near those of the original sound before compression. It also corrects the sense of volume ofthe bass to obtain richer sound with compressed audio signals.Setting detailsOFF : Do not use RESTORER.Mode 1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.Mode 2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.• This item can be set with analog signals or when a PCM signal (fs = 44.1/48kHz) is input.• This cannot be set when the surround mode is set to “DIRECT” or “PUREDIRECT”.• This item default setting for “iPod” and “USB/iPod” is “Mode 3”. All others areset to “OFF”.• When set to something other than “OFF”, is displayed.• Pressing RESTORER on the remote control unit or the main unit makes thissetting.OFF Mode 1(RESTORER 64)Mode 2(RESTORER 96)Mode 3(RESTORER HQ)n Audio Delay Default settings are underlined.While viewing video, manually adjust the time to delay audio output.Setting details0ms – 200ms• This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” is set to “ON” and whena TV compatible with Auto Lip Sync is connected.• Store “Audio Delay” for each input source.• Audio Delay for game mode can be set when “Video Mode” (vpage 49) is set to “Game”.Picture Adjust Default settings are underlined.• This item can be set when the input source is BD DVD TV SAT/CBL DVR GAME V.AUXDOCK .• With input sources other than the ones above, this item can be set when “Video Select” is selected. Inthis case, the original input source settings are called out.• Can be set when the “Video Convert” setting (vpage 49) is “ON”.• “BD”, “TV”, or “GAME” can be set when “HDMI” (vpage 48) or “Component” (vpage 49) has beenassigned.Setting items Setting detailsContrastAdjust picture contrast.–6 – +6 (0)BrightnessAdjust picture brightness.0 – +12Chroma LevelAdjust picture chroma level(saturation).–6 – +6 (0)HueAdjust color hue.–6 – +6 (0)DNRReduce overall picturenoise.OFF / Low / Mid / HighEnhancerEmphasize picture contours.0 – +12• “DNR” and “Enhancer” are each effective with HDMI output.• The value set at “Picture Adjust” is stored in the memory individually for each input source.