62ENGLISHManual SetupRemote control operationbuttonsMove the cursor(Up/Down/Left/Right) Confirm the setting Return to previous menuSetting items Setting detailsVolume Control(Continued)Power On Level : Define the volume setting that is active when thepower is turned on.• Last : Use the memorized setting from the last session.• – – – (0) : Always use the muting on condition when power is turned on.• –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.Mute Level : Set the amount of attenuation when muting is on.• Full : The sound is muted entirely.• –40dB : The sound is attenuated by 40 dB down.• –20dB : The sound is attenuated by 20 dB down.Source DeleteRemove from the displayinput sources that are notused.BD / DVD / TV / SAT/CBL / DVR / GAME / V.AUX/ DOCK / USB/iPod / HD Radio / CD : Select inputsource that is not used.• ON : Use this source.• Delete : Do not use this source.NOTE• Input sources being used in the various zonescannot be deleted.• Input sources set to “Delete” cannot be selectedusing SOURCE SELECT.GUIMake the settings related todisplays on the TV screen.Screensaver : Make screensaver settings.• ON : The screen saver is activated during menu display, iPod, USB/iPodor HD Radio screen display if no operation is performed for anapproximately 3-minute continuous period. When you press uio p,the screensaver is cancelled and the screen before that screen saverstarted is displayed.• OFF : Screensaver is not activated.Wall Paper : Set wallpaper to display in the background when playbackis stopped, etc.• Picture : Set the background to a picture (DENON logo).• Black : Set the background to black.Format : Set the video signal format to be output for the TV you are using.• NTSC : Select NTSC output.• PAL : Select PAL output.“Format” can also be set by the followingprocedure. However, the menu screen is notdisplayed.1. Press and hold the main unit’s p and i for atleast 3 seconds.“Video Format” appears on the display.2. Press o p and set the video signal format.3. Press the main unit’s ENTER, MENU or RETURNto complete the setting.Setting items Setting detailsChannelSet the signal output fromZONE2.Stereo : Select stereo output.Mono : Select mono output.Volume LevelSet the volume output level.Variable : Volume adjustment is enabled by main unit and remote controlunit.–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by externalamplifier.0dB (81) : Fix volume at 0 dB. Set when adjusting volume by externalamplifier.When “Amp Assign” (vpage 57) is set to “ZONE2”, the “VolumeLevel” setting is automatically set to “Variable”.Volume LimitMake a setting formaximum volume.OFF : Do not set a maximum volume.–20dB (61) / –10dB (71) / 0dB (81)• This can be set when the multi-zone “Volume Level” setting (vpage 62)is “Variable”.• This is displayed from 0 to 99 when “Volume Display” (vpage 62) is setto “Absolute”.Power On LevelDefine the volume settingthat is active when thepower is turned on.Last : Use the memorized setting from the last session.– – – (0) : Always mute when power is turned on.–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.• This can be set when the multi-zone “Volume Level” setting (vpage 62)is “Variable”.• This is displayed from 0 to 99 when “Volume Display” (vpage 62) is setto “Absolute”.Mute LevelSet the amount ofattenuation when mutingis on.Full : The sound is muted entirely.–40dB : The sound is attenuated by 40 dB down.–20dB : The sound is attenuated by 20 dB down.Option Setup Default settings are underlined.Make various other settings.Setting items Setting detailsVolume ControlSet the MAIN ZONE (roomwhere the unit is located)volume setting.Volume Display : Set how volume is displayed.• Relative : Display ---dB (Min), in the range –80.5 dB – 18 dB.• Absolute : Display in the range 0 (Min) – 99.• The “Volume Display” setting is applied also to the “Volume Limit” and“Power On Level” display method.• The “Volume Display” setting applies to all zones.Volume Limit : Make a setting for maximum volume.• OFF : Do not set a maximum volume.• –20dB (61) / –10dB (71) / 0dB (81)