60ENGLISHManual SetupRemote control operationbuttonsMove the cursor(Up/Down/Left/Right) Confirm the setting Return to previous menuHDMI Setup Default settings are underlined.Make settings for HDMI video/audio output.Setting items Setting detailsRGB RangeSet the video range of RGBoutput from the HDMIconnector.Normal : Output with RGB video range (16 (black) to 235 (white)).Enhanced : Output with RGB video range (0 (black) to 255 (white)).This setting is active when using a TV equipped with a DVI terminal.Auto Lip SyncMake automaticcompensation for timingshift in audio and videooutput.ON : Compensated.OFF : Not compensated.HDMI Audio OutSelect HDMI audio outputdevice.AMP : Play back through speakers connected to the receiver.TV : Play back through TV connected to the receiver.When the HDMI control function is activated, priority is given to the TVaudio setting (vpage 38 “HDMI control function”).HDMI ControlYou can link operations withdevices connected to HDMIand compatible with HDMIControl.ON : Use HDMI control function.OFF : Do not use HDMI control function.• When a device that is not compatible with the HDMI control function isconnected, set “HDMI Control” to “OFF”.• Please consult the operating instructions for each connected componentto check the settings.• Refer to “HDMI control function” (vpage38) for more information aboutthe HDMI control function.NOTE• When “HDMI Control” is set to “ON”, it consumes more standbypower. If you are not using this unit for an extended period, it isrecommended that you unplug the power cord from the power outlet.• “HDMI Control” does not work when the power to the equipment is off.Either turn power on or set to standby.• The HDMI control function controls operations of a TV that is compatiblewith the HDMI control function. Make sure that the TV and HDMI areconnected when you perform HDMI control.• If the “HDMI Control” settings have been changed, always reset thepower to connected devices after the change.Standby SourceSets the HDMI input sourceto put into standby whenthe power is on.Last : This item is set at the last-used input source.HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 : Put the respectiveinput source into standby.“Standby Source” can be set when “HDMI Control” is set to “ON”.Setting items Setting detailsPower Off ControlLinks the power standbyof this unit to externalequipment.All : If power to a connected TV is turned off independently of the inputsource, power to this unit is automatically set to standby.Video : If power to a connected TV is turned off when the input source isBD / DVD / TV / SAT/CBL / DVR / GAME / V.AUX / DOCK, power to this unitis automatically set to standby.OFF : This unit does not link with power to a TV.“Power Off Control” can be set when “HDMI Control” is set to “ON”.Audio Setup Default settings are underlined.Make settings for audio playback.Setting items Setting details2ch Direct/StereoSelect the method forsetting the speakers usedin the 2-channel direct andstereo playback modes.Setting : Select the method for setting the speakers used in the 2-channeldirect and stereo playback modes.• Basic : The settings at “Speaker Setup” (vpage 57) are applied.• Custom : Make separate settings for 2-channel. Make the followingsettings:Front : Set the front speaker size.• Large : Use a large speaker that can adequately play back lowfrequencies.• Small : Use a small speaker that has inadequate playback capacity forlow frequencies.If “Speaker Config.” – “Subwoofer” (vpage 57) is set to “No”, thesetting is automatically set to “Large”.Subwoofer : Set the presence of a subwoofer.• Yes : Use a subwoofer.• No : Select when a subwoofer is not connected.If “Speaker Config.” – “Subwoofer” (vpage 57) is set to “No”, thesetting is automatically set to “No”. If the “Front” setting is “Small”,the setting is automatically “Yes”.SW Mode : Select low range signals to be reproduced by subwoofer.• LFE : When the “2ch Direct/Stereo” – “Front” setting is set to “Large”,the LFE signal alone is output from the subwoofer. Also, when the “2chDirect/Stereo” – “Front” setting is set to “Small”, the front channel lowrange signal is added to the LFE signal output from the subwoofer.• LFE+Main : The front channel low range signal is added to the LFE signaloutput from the subwoofer.This setting can be set made “2ch Direct/Stereo” – “Subwoofer” isset to “Yes”.