704. Additional Source mode4.1. Specifications• The Additional Source setting is added for the custom installer. When the setting is "ON", AUX3-7 is added as aSource.It is possible to add the number of Sources for use by assigning various input connectors in Input Assign Menu.• The added AUX3-7 is displayed and available for selection in the Source related settings such as Input Setup in SetupMenu.• The default setting is "OFF".4.2. Operation1. Press the "Power Operation (X)" button while pressing "BACK" and "CURSOR f" buttons on the set to turn the poweron.2. After the POWER ON sequence, FLD displays the indication for the Additional Source mode.3. Press the "Cursor 0"/"Cursor 1" buttons to select the setting.ON OFFUpper * A d d S o u r c e M o d eLower < O F F >• ON is selectedLower < O N >• OFF is selectedLower < O F F >4. Press the "ENTER" button to confirm the setting.5. Protection Pass mode5.1. Specifications• Turn the power on with Protection disabled.Except for disabling the Protection detection, this operation is the same as the normal power on.5.2. Operation1. Press the "Power Operation (X)" button while pressing "DIMMER" and "BACK" buttons on the set to turn the poweron.2. The POWER ON sequence starts. The Protection detection is disabled.Upper P r o t e c t i o n P a s sLowerThis is displayed for 5 seconds before returning to the normal display.