8TECHNICAL SPECIFICATIONSn Audio Section• Power amplifierRated output :Front :150 W + 150 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)190 W + 190 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Center :150 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)190 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Surround :150 W + 150 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)190 W + 190 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Surround back / Front height / Front wide :150 W + 150 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)190 W + 190 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Dynamic power : 170 W x 2ch (8 Ω)280 W x 2ch (4 Ω)Output connectors : 4 – 16 Ω• AnalogInput sensitivity/Input impedance : 200 mV/47 kΩFrequency response : 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)S/N : 102 dB (IHF–A weighted, DIRECT mode)Distortion : 0.005 % (20 Hz – 20 kHz) (DIRECT mode)Rated output : 1.2 V• DigitalD/A output : Rated output — 2 V (at 0 dB playback)Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)S/N ratio — 102 dBDynamic range — 100 dBDigital input : Format — Digital audio interface• Phono equalizer (PHONO input — MEDIA PLAYER OUT)Input sensitivity : 2.5 mVRIAA deviation : ±1 dB (20 Hz to 20 kHz)S/N : 74 dB (IHF–A weighted)Rated output : 150 mVDistortion factor : 0.03 % (1 kHz, 3 V)n Video section• Standard video connectorsInput/output level and impedance : 1 Vp-p, 75 ΩFrequency response : 5 Hz – 10 MHz — 0, –3 dB(when “Video Conversion” set to “Off”)• Color component video connectorInput/output level and impedance : Y signal — 1 Vp-p, 75 ΩPB / CB signal — 0.7 Vp-p, 75 ΩPR / CR signal — 0.7 Vp-p, 75 ΩFrequency response : 5 Hz – 60 MHz — 0, –3 dB(when “Video Conversion” set to “Off”)n Tuner section (E3 model)(ANTENNA input – MEDIA PLAYER OUT)[FM](Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W)Receiving Range :[FM] 87.5 MHz – 107.9 MHz[AM] 530 kHz – 1710 kHzUsable Sensitivity :[FM]1.5 μV (14.8 dBf)[AM] 20 μVS/N (IHF–A weighted) :[FM]MONO 78 dBSTEREO 68 dBHD 85 dB[AM]HD 85 dBDistortion (1 kHz) :[FM]MONO 0.1 %STEREO 0.2 %HD 0.02 %[AM]HD 0.02 %n Tuner section (E2,E1C model)(ANTENNA input – MEDIA PLAYER OUT)[FM](Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W)Receiving Range :[FM] 87.5 MHz – 108.0 MHzUsable Sensitivity :[FM]1.2 μV (12.8 dBf)50 dB Quieting Sensitivity :[FM]MONO 2.0 μ (20.2 dBf)S/N (IHF–A weighted):[FM]MONO 70 dBSTEREO 67 dBDistortion (1 kHz) :[FM]MONO 0.7 % (1 kHz)STEREO 1.0 % (1 kHz)n Switching hubStandard : IEEE 802.3 (10 Base-T)-compliantIEEE 802.3u (100 Base-TX)-compliantNumber of ports : 4 portsn GeneralPower supply (for E3 model) : AC 120 V, 60 HzPower supply (for E2 model) : AC 230 V, 50/60 HzPower supply (for E1C model) : AC 220 V, 50 HzPower consumption : 780 WPower consumption in standby mode : 0.1 WPower consumption in CEC standby mode : 0.5 WPower comsumption in network standby mode : 5.1 WWeight : 16.5 kg18.518014.5194.564.7 244.5422.7382.843434430.5 35.511454.2 163 133DIMENSION